Furnish and install (4) new 120V duplex receptacle outlets in the parking garage for signage and banner power.
Utilize an existing non-dedicated branch circuit located within approximately 25 feet of the first outlet location.
Furnish and install surface-mounted EMT conduit between power source and new outlet locations.
Furnish and install conductors, outlet boxes, receptacles, covers, fittings, connectors, and associated mounting hardware.
Make all electrical connections to the existing po · Electrical
Furnish and install (4) new 120V duplex receptacle outlets in the parking garage for signage and banner power.
Utilize an existing non-dedicated branch circuit located within approximately 25 feet of the first outlet location.
Furnish and install surface-mounted EMT conduit between power source and new outlet locations.
Furnish and install conductors, outlet boxes, receptacles, covers, fittings, connectors, and associated mounting hardware.
Make all electrical connections to the existing po · Electrical
No product keyword matched · Seattle electrical permits
PACKAGE LOCKER ROOM ALTERATIONS
Install one (1) 120V receptacle outside the parcel room below the LuxerOne equipment.
Install three (3) Cat6 receptacle for camera power.
Pull (1) Cat6 data cables from the IDF room located on the floor above to the parcel room.
Furnish and install (1) electric door strike · Electrical
No product keyword matched · Seattle electrical permits
1. Wall Sconce Installation (2 Fixtures)
Furnish and install (2) 120V hardwired outdoor wall sconces (customer-approved style similar to existing battery units)
Install approximately 40 ft of exposed conduit from nearest power source
Pull conductors, make all terminations, and weatherproof connections
Mount fixtures securely to exterior surfaces
2. Photocell Control
Provide and install (1) photocell to automatically control the new wall sconces
Integrate photocell into circuit for dusk-t · Electrical
No product keyword matched · Seattle electrical permits
installing new appliance outlets in the East Courtyard and providing power for BBQ and fire bowl equipment on the East & West Terraces. Work includes conduit routing, branch circuit installation, power distribution, and all required coordination. East Courtyard - Dedicated Appliance Outlets (3) Provide and install three (3) 120V, 20A GFCI-protected appliance receptacles for sports equipment. East & West Terraces - BBQ & Fire Bowl Power -East Terrace Extend an existing circuit for two (2) GFCI-p · Electrical
No product keyword matched · Seattle electrical permits
Dedicated Circuit Installation - Leasing Office Printer
Install a new dedicated 120V circuit from the electrical panel located on the P-1 level to the printer location on the 1st floor. · Electrical
No product keyword matched · Seattle electrical permits
Scope of Work - Included
1. Removal of Existing Fixture
Safely disconnect and remove the existing track light and its associated mounting hardware.
Cap or remove unused wiring as required.
2. New LED Canless Fixture Installation (Four 6" Trims)
Layout and mark locations for four (4) new recessed LED canless downlights to evenly distribute illumination.
Drill/cut new 6" ceiling openings using proper dust control.
Install new IC-rated, canless LED trims with junction boxes. · Electrical
No product keyword matched · Seattle electrical permits
Install a new 500-watt, 2-ft baseboard heater (120V)The heater will be connected to an existing 120V circuit currently powering a 900-watt heater in the elevator lobby. · Electrical
No product keyword matched · Seattle electrical permits